The AWD3 energy meter enables all relevant data to be exported via its integral serial modbus interface (RS485). It measures energy, current, voltage (per phase) and both active and reactive power per phase or as total output.

• Voltage measurement: 3 x 230 / 400 V AC
• Current measurement: max. 6 A (up to 6 kA with transformer)
• Interfaces: RS485 / S0
• Accuracy class: Class B
• Operating temperature: - 10 … 55 °C
• Protection class: IP 20
• Dimensions (H x W x D): 62 x 70 x 81 mm
• Installation: Top-hat rail

The ALE3 energy meter enables all relevant data to be exported via its integral serial modbus interface (RS485). It measures energy, current, voltage (per phase) and both active and reactive power per phase or as total output.

• Voltage measurement: 3 x 230 / 400 V AC
• Current measurement: max. 65 A
• Interfaces: RS485 / S0
• Accuracy class: Class B
• Operating temperature: - 10 … 55 °C
• Protection class: IP 20
• Dimensions (H x W x D): 62 x 70 x 81 mm
• Installation: Top-hat rail

Optical device for reading consumption meters which automatically adjusts to the respective meter.

• Supply voltage: 5,5 … 30 V DC
• Current consumption: max. 5 mA
• Operating temperature: - 20 … 60 °C
• Protection class: IP 50
• Dimensions (H x W x D): 22.5 x 42.5 x 21.5 mm
• Installation: Stand

for further information please visit our download center

The pulse doubler amplifies and doubles pulse signals from energy meters with an S0 interface. By doubling the signal, the signal can be sent to a display panel, for example, as well as a data logger.

• Supply voltage: 20 … 253 V AC / DC
• Current consumption: max. 11 mA
• Operating temperature: 0 … 50 °C
• Protection class: IP 20
• Interface: S0-interface
• Dimensions (H x W x D): 78 x 23 x 103 mm
• Installation: Top-hat rail